Our Facility and Technical Capability
760 m² covered area and a 135 m² laser cell in Gebze / Kocaeli, Türkiye, with 6000 W laser power and 7-axis robot automation.
What each figure means
- 6000 W laser power — enough to form a stable melt pool in cladding and to work with wide spot sizes in hardening.
- 7-axis robot — required to keep the laser head at the correct angle across geometries that are not flat. This is what matters on complex die surfaces.
- 7 m linear axis — long parts are processed in a single set-up. Re-clamping a part costs time and introduces alignment error.
- 135 m² laser cell — an enclosed, safe working volume where large parts can be positioned.
- 760 m² covered area — goods-in, preparation, processing and dispatch under one roof.
What size of part we can take
We do not quote a fixed upper limit on part length — what decides it is handling and fixturing. The three figures below let you check your part against our capacity before picking up the phone.
6 m × Ø1400 mm
Shafts, rolls, crankshafts and rotors are mounted on the rotary positioner, which takes parts up to 6 m long and 1400 mm in diameter.
15 tonnes
Crane capacity. Getting the part into the building and onto the cell is bounded by this figure.
7 m
For dies and housings processed without rotation — the laser head travelling over the part — the linear axis travel is what counts.
Borderline part? Send the dimensions and the weight. If it can be fixtured we will do it; if it cannot, we will say so before you ship it.
Gebze / Kocaeli, Türkiye
Surface engineering
for what comes next
GOOMTECH Mühendislik Sanayi Limited Şirketi was founded to deliver high-precision, robot-controlled solutions using advanced laser systems in metal surface technologies.
Our aim is to be a reference company providing sustainable engineering solutions that increase surface durability and production efficiency — in die and automotive work above all, and across heavy industry and defence.
Our technical team has more than ten years of field experience and approaches every project with engineering discipline, process control and a quality-focused mindset.
Our Vision
To be one of the leading companies in metal surface engineering that Türkiye refers to and trusts.
Our Mission
To add value to our customers' production processes with high technology and engineering capability — reducing their costs and extending product life.
An audited management system
All three certificates were issued on 14.04.2026 and are valid until 13.04.2027. The certification body is SIGMACERT, IAF / IAS akrediteli (MSCB-136).
ISO 9001:2015
Shows that process control, records and complaint handling run through an audited system.
Certificate no: MTS-49935
ISO 14001:2015
Shows that waste, emissions and chemical handling are audited — directly relevant to customers moving away from hard chrome.
Certificate no: MTS-49936
ISO 45001:2018
Shows that safety is managed systematically in a facility operating a high-power laser.
Certificate no: MTS-49937
Scope: machining of metals and laser machining of metal surfaces (lathe work, drilling, turning, milling, planing, polishing, grooving, finishing, jointing, welding, deburring, sandblasting).
Come and see the facility
If you are in the region or passing through, you are welcome to visit and see production for yourself.